TALK=T;RUN(1,1)
  DISPLAY
  The case considered is fully-developed turbulent flow and heat
  transfer in a circular pipe at Re=1.E5 and Pr=3.0. The tube wall
  is held at a constant temperature, and the calculation integrates
  down to the wall through the viscous sublayer. A non-uniform grid
  is employed so as to concentrate cells very close to the wall.
  For this purpose a grid is generated which is a geometric
  progression with the property that the ratio of any two adjacent
  cell lengths is a constant. The turbulence is simulated using
  the low Reynolds version of the Spalart-Allmaras model.

  This model predicts the following results compared to experimental
  data:

          f        vdp     Nu
  SA      0.018    4.07    361
  Data    0.018    3.75    392

  where f =8.*(wstar/wbulk)**2 is the friction factor,
  vdp=(wcl-wbulk)/u* is the velocity defect parameter and
  Nu=h*d/k is the Nusselt number.
  In-Form is used to print the f, vdp and Nu to the PHIDA, RESULT
  and inforout files.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(S-A Low Re_1D DEVELOPED PIPE FLOW       )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = F
 NX = 1
 XULAST =0.1
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 58
 YVLAST =0.05
 YFRAC(1)=0.038842 ;YFRAC(3)=0.206387
 YFRAC(5)=0.344854 ;YFRAC(7)=0.459289
 YFRAC(9)=0.553864 ;YFRAC(11)=0.632025
 YFRAC(13)=0.696621 ;YFRAC(15)=0.750006
 YFRAC(17)=0.794126 ;YFRAC(19)=0.830588
 YFRAC(21)=0.860723 ;YFRAC(23)=0.885627
 YFRAC(25)=0.906209 ;YFRAC(27)=0.92322
 YFRAC(29)=0.937277 ;YFRAC(31)=0.948896
 YFRAC(33)=0.958497 ;YFRAC(35)=0.966433
 YFRAC(37)=0.972991 ;YFRAC(39)=0.978411
 YFRAC(41)=0.98289 ;YFRAC(43)=0.986592
 YFRAC(45)=0.989651 ;YFRAC(47)=0.99218
 YFRAC(49)=0.994269 ;YFRAC(51)=0.995996
 YFRAC(53)=0.997424 ;YFRAC(55)=0.998603
 YFRAC(57)=0.999578
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.0E-02
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(5)=V1 ;NAME(7)=W1
 NAME(124)=NUSS ;NAME(125)=TB
 NAME(126)=ASUM ;NAME(127)=TSUM
 NAME(128)=YPL ;NAME(129)=UPL
 NAME(130)=VDP ;NAME(131)=USTR
 NAME(132)=UTAU ;NAME(133)=FRIC
 NAME(134)=PRPS ;NAME(135)=HTCO
 NAME(136)=STAN ;NAME(137)=AREH
 NAME(138)=KOND ;NAME(139)=EPKE
 NAME(140)=DWDY ;NAME(141)=LTLS
 NAME(142)=WDIS ;NAME(143)=VOR1
 NAME(144)=SKIN ;NAME(145)=YPLS
 NAME(146)=STRS ;NAME(147)=LEN1
 NAME(148)=ENUT ;NAME(149)=TEM1
 NAME(150)=ENTI
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(V1,Y,N,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,N)
 SOLUTN(NUSS,Y,N,N,N,N,N)
 SOLUTN(TB,Y,N,N,N,N,N)
 SOLUTN(ASUM,Y,N,N,N,N,N)
 SOLUTN(TSUM,Y,N,N,N,N,N)
 SOLUTN(YPL,Y,N,N,N,N,N)
 SOLUTN(UPL,Y,N,N,N,N,N)
 SOLUTN(VDP,Y,N,N,N,N,N)
 SOLUTN(USTR,Y,N,N,N,N,N)
 SOLUTN(UTAU,Y,N,N,N,N,N)
 SOLUTN(FRIC,Y,N,N,N,N,N)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 SOLUTN(HTCO,Y,N,N,N,N,Y)
 SOLUTN(STAN,Y,N,N,N,N,Y)
 SOLUTN(AREH,Y,N,N,N,N,Y)
 SOLUTN(KOND,Y,N,N,N,N,Y)
 SOLUTN(EPKE,Y,N,N,N,N,N)
 SOLUTN(DWDY,Y,N,N,N,N,N)
 SOLUTN(LTLS,Y,Y,Y,N,N,Y)
 SOLUTN(WDIS,Y,N,N,N,N,N)
 SOLUTN(VOR1,Y,N,N,N,N,N)
 SOLUTN(SKIN,Y,N,N,N,N,Y)
 SOLUTN(YPLS,Y,N,N,N,N,Y)
 SOLUTN(STRS,Y,N,N,N,N,Y)
 SOLUTN(LEN1,Y,N,N,N,N,Y)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 SOLUTN(TEM1,Y,Y,N,N,N,Y)
 SOLUTN(ENTI,Y,Y,Y,N,N,Y)
 VIST = 148
 LEN1 = 147
 PRPS = 134
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(W1,N,N,Y,Y,Y,Y)
 TERMS(LTLS,N,N,Y,N,Y,Y)
 TERMS(TEM1,N,N,Y,Y,N,Y)
 TERMS(ENTI,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWENT = F
 USOURC = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-06 ;ENUT = GRND2
 ENUTA =0. ;ENUTB =0. ;ENUTC =0.
 IENUTA = 22
 PRNDTL(W1)=1. ;PRNDTL(LTLS)=1.
 PRNDTL(TEM1)=CONDFILE ;PRNDTL(ENTI)=0.666667
 PRT(W1)=1. ;PRT(LTLS)=1.
 PRT(TEM1)=1. ;PRT(ENTI)=0.666667
 CP1 =1. ;CP2 =1.
   *  List of user-defined materials to be read by EARTH
    MATFLG=T;IMAT=1   
   *  Name
   *Ind. Dens.  Viscos.  Spec.heat  Conduct.  Expans.  Compr.
   *  
    33 1. 1.E-6 1.0 3.333E-7 0
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(V1)=1.0E-10 ;FIINIT(W1)=1.0E-10
 FIINIT(NUSS)=1.0E-10 ;FIINIT(TB)=1.0E-10
 FIINIT(ASUM)=1.0E-10 ;FIINIT(TSUM)=1.0E-10
 FIINIT(YPL)=1.0E-10 ;FIINIT(UPL)=1.0E-10
 FIINIT(VDP)=1.0E-10 ;FIINIT(USTR)=1.0E-10
 FIINIT(UTAU)=1.0E-10 ;FIINIT(FRIC)=1.0E-10
 FIINIT(PRPS)=33. ;FIINIT(HTCO)=1.0E-10
 FIINIT(STAN)=1.0E-10 ;FIINIT(AREH)=1.0E-10
 FIINIT(KOND)=1.0E-10 ;FIINIT(EPKE)=1.0E-10
 FIINIT(DWDY)=1.0E-10 ;FIINIT(LTLS)=1.0E-10
 FIINIT(WDIS)=1.0E-03 ;FIINIT(VOR1)=1.0E-10
 FIINIT(SKIN)=1.0E-10 ;FIINIT(YPLS)=1.0E-10
 FIINIT(STRS)=1.0E-10 ;FIINIT(LEN1)=1.0E-10
 FIINIT(ENUT)=1.0E-10 ;FIINIT(TEM1)=5.
 FIINIT(ENTI)=1.4025E-04
 
 PATCH(IN1 ,INIVAL, 1, 1, 1, 1, 1, 1, 1, 1)
 INIT(IN1 ,W1 ,0. ,1.144765 )
 
 PATCH(IN2 ,INIVAL, 1, 1, 2, 2, 1, 1, 1, 1)
 INIT(IN2 ,W1 ,0. ,1.137051 )
 
 PATCH(IN3 ,INIVAL, 1, 1, 3, 3, 1, 1, 1, 1)
 INIT(IN3 ,W1 ,0. ,1.12598 )
 
 PATCH(IN4 ,INIVAL, 1, 1, 4, 4, 1, 1, 1, 1)
 INIT(IN4 ,W1 ,0. ,1.114904 )
 
 PATCH(IN5 ,INIVAL, 1, 1, 5, 5, 1, 1, 1, 1)
 INIT(IN5 ,W1 ,0. ,1.103823 )
 
 PATCH(IN6 ,INIVAL, 1, 1, 6, 6, 1, 1, 1, 1)
 INIT(IN6 ,W1 ,0. ,1.092735 )
 
 PATCH(IN7 ,INIVAL, 1, 1, 7, 7, 1, 1, 1, 1)
 INIT(IN7 ,W1 ,0. ,1.081639 )
 
 PATCH(IN8 ,INIVAL, 1, 1, 8, 8, 1, 1, 1, 1)
 INIT(IN8 ,W1 ,0. ,1.070536 )
 
 PATCH(IN9 ,INIVAL, 1, 1, 9, 9, 1, 1, 1, 1)
 INIT(IN9 ,W1 ,0. ,1.059425 )
 
 PATCH(IN10 ,INIVAL, 1, 1, 10, 10, 1, 1, 1, 1)
 INIT(IN10 ,W1 ,0. ,1.048303 )
 
 PATCH(IN11 ,INIVAL, 1, 1, 11, 11, 1, 1, 1, 1)
 INIT(IN11 ,W1 ,0. ,1.037171 )
 
 PATCH(IN12 ,INIVAL, 1, 1, 12, 12, 1, 1, 1, 1)
 INIT(IN12 ,W1 ,0. ,1.026028 )
 
 PATCH(IN13 ,INIVAL, 1, 1, 13, 13, 1, 1, 1, 1)
 INIT(IN13 ,W1 ,0. ,1.014872 )
 
 PATCH(IN14 ,INIVAL, 1, 1, 14, 14, 1, 1, 1, 1)
 INIT(IN14 ,W1 ,0. ,1.003701 )
 
 PATCH(IN15 ,INIVAL, 1, 1, 15, 15, 1, 1, 1, 1)
 INIT(IN15 ,W1 ,0. ,0.992515 )
 
 PATCH(IN16 ,INIVAL, 1, 1, 16, 16, 1, 1, 1, 1)
 INIT(IN16 ,W1 ,0. ,0.981312 )
 
 PATCH(IN17 ,INIVAL, 1, 1, 17, 17, 1, 1, 1, 1)
 INIT(IN17 ,W1 ,0. ,0.97009 )
 
 PATCH(IN18 ,INIVAL, 1, 1, 18, 18, 1, 1, 1, 1)
 INIT(IN18 ,W1 ,0. ,0.958847 )
 
 PATCH(IN19 ,INIVAL, 1, 1, 19, 19, 1, 1, 1, 1)
 INIT(IN19 ,W1 ,0. ,0.947581 )
 
 PATCH(IN20 ,INIVAL, 1, 1, 20, 20, 1, 1, 1, 1)
 INIT(IN20 ,W1 ,0. ,0.93629 )
 
 PATCH(IN21 ,INIVAL, 1, 1, 21, 21, 1, 1, 1, 1)
 INIT(IN21 ,W1 ,0. ,0.92497 )
 
 PATCH(IN22 ,INIVAL, 1, 1, 22, 22, 1, 1, 1, 1)
 INIT(IN22 ,W1 ,0. ,0.91362 )
 
 PATCH(IN23 ,INIVAL, 1, 1, 23, 23, 1, 1, 1, 1)
 INIT(IN23 ,W1 ,0. ,0.902234 )
 
 PATCH(IN24 ,INIVAL, 1, 1, 24, 24, 1, 1, 1, 1)
 INIT(IN24 ,W1 ,0. ,0.890811 )
 
 PATCH(IN25 ,INIVAL, 1, 1, 25, 25, 1, 1, 1, 1)
 INIT(IN25 ,W1 ,0. ,0.879345 )
 
 PATCH(IN26 ,INIVAL, 1, 1, 26, 26, 1, 1, 1, 1)
 INIT(IN26 ,W1 ,0. ,0.867833 )
 
 PATCH(IN27 ,INIVAL, 1, 1, 27, 27, 1, 1, 1, 1)
 INIT(IN27 ,W1 ,0. ,0.856268 )
 
 PATCH(IN28 ,INIVAL, 1, 1, 28, 28, 1, 1, 1, 1)
 INIT(IN28 ,W1 ,0. ,0.844646 )
 
 PATCH(IN29 ,INIVAL, 1, 1, 29, 29, 1, 1, 1, 1)
 INIT(IN29 ,W1 ,0. ,0.832959 )
 
 PATCH(IN30 ,INIVAL, 1, 1, 30, 30, 1, 1, 1, 1)
 INIT(IN30 ,W1 ,0. ,0.821202 )
 
 PATCH(IN31 ,INIVAL, 1, 1, 31, 31, 1, 1, 1, 1)
 INIT(IN31 ,W1 ,0. ,0.809364 )
 
 PATCH(IN32 ,INIVAL, 1, 1, 32, 32, 1, 1, 1, 1)
 INIT(IN32 ,W1 ,0. ,0.797438 )
 
 PATCH(IN33 ,INIVAL, 1, 1, 33, 33, 1, 1, 1, 1)
 INIT(IN33 ,W1 ,0. ,0.785412 )
 
 PATCH(IN34 ,INIVAL, 1, 1, 34, 34, 1, 1, 1, 1)
 INIT(IN34 ,W1 ,0. ,0.773276 )
 
 PATCH(IN35 ,INIVAL, 1, 1, 35, 35, 1, 1, 1, 1)
 INIT(IN35 ,W1 ,0. ,0.761015 )
 
 PATCH(IN36 ,INIVAL, 1, 1, 36, 36, 1, 1, 1, 1)
 INIT(IN36 ,W1 ,0. ,0.748613 )
 
 PATCH(IN37 ,INIVAL, 1, 1, 37, 37, 1, 1, 1, 1)
 INIT(IN37 ,W1 ,0. ,0.736054 )
 
 PATCH(IN38 ,INIVAL, 1, 1, 38, 38, 1, 1, 1, 1)
 INIT(IN38 ,W1 ,0. ,0.723317 )
 
 PATCH(IN39 ,INIVAL, 1, 1, 39, 39, 1, 1, 1, 1)
 INIT(IN39 ,W1 ,0. ,0.710377 )
 
 PATCH(IN40 ,INIVAL, 1, 1, 40, 40, 1, 1, 1, 1)
 INIT(IN40 ,W1 ,0. ,0.697208 )
 
 PATCH(IN41 ,INIVAL, 1, 1, 41, 41, 1, 1, 1, 1)
 INIT(IN41 ,W1 ,0. ,0.683776 )
 
 PATCH(IN42 ,INIVAL, 1, 1, 42, 42, 1, 1, 1, 1)
 INIT(IN42 ,W1 ,0. ,0.670044 )
 
 PATCH(IN43 ,INIVAL, 1, 1, 43, 43, 1, 1, 1, 1)
 INIT(IN43 ,W1 ,0. ,0.655964 )
 
 PATCH(IN44 ,INIVAL, 1, 1, 44, 44, 1, 1, 1, 1)
 INIT(IN44 ,W1 ,0. ,0.641482 )
 
 PATCH(IN45 ,INIVAL, 1, 1, 45, 45, 1, 1, 1, 1)
 INIT(IN45 ,W1 ,0. ,0.626529 )
 
 PATCH(IN46 ,INIVAL, 1, 1, 46, 46, 1, 1, 1, 1)
 INIT(IN46 ,W1 ,0. ,0.611022 )
 
 PATCH(IN47 ,INIVAL, 1, 1, 47, 47, 1, 1, 1, 1)
 INIT(IN47 ,W1 ,0. ,0.594856 )
 
 PATCH(IN48 ,INIVAL, 1, 1, 48, 48, 1, 1, 1, 1)
 INIT(IN48 ,W1 ,0. ,0.577897 )
 
 PATCH(IN49 ,INIVAL, 1, 1, 49, 49, 1, 1, 1, 1)
 INIT(IN49 ,W1 ,0. ,0.55997 )
 
 PATCH(IN50 ,INIVAL, 1, 1, 50, 50, 1, 1, 1, 1)
 INIT(IN50 ,W1 ,0. ,0.540842 )
 
 PATCH(IN51 ,INIVAL, 1, 1, 51, 51, 1, 1, 1, 1)
 INIT(IN51 ,W1 ,0. ,0.495807 )
 
 PATCH(IN52 ,INIVAL, 1, 1, 52, 52, 1, 1, 1, 1)
 INIT(IN52 ,W1 ,0. ,0.407648 )
 
 PATCH(IN53 ,INIVAL, 1, 1, 53, 53, 1, 1, 1, 1)
 INIT(IN53 ,W1 ,0. ,0.327501 )
 
 PATCH(IN54 ,INIVAL, 1, 1, 54, 54, 1, 1, 1, 1)
 INIT(IN54 ,W1 ,0. ,0.254644 )
 
 PATCH(IN55 ,INIVAL, 1, 1, 55, 55, 1, 1, 1, 1)
 INIT(IN55 ,W1 ,0. ,0.188408 )
 
 PATCH(IN56 ,INIVAL, 1, 1, 56, 56, 1, 1, 1, 1)
 INIT(IN56 ,W1 ,0. ,0.128203 )
 
 PATCH(IN57 ,INIVAL, 1, 1, 57, 57, 1, 1, 1, 1)
 INIT(IN57 ,W1 ,0. ,0.073459 )
 
 PATCH(IN58 ,INIVAL, 1, 1, 58, 58, 1, 1, 1, 1)
 INIT(IN58 ,W1 ,0. ,0.023697 )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(SASOPRO ,PHASEM, 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(SASOPRO ,ENTI, FIXFLU , GRND4 )
 
 PATCH(SASODIS ,PHASEM, 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(SASODIS ,ENTI, GRND4 ,0. )
 
 PATCH(SASODIF ,PHASEM, 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(SASODIF ,ENTI, FIXFLU , GRND4 )
 
 PATCH(WALLN ,NWALL , 1, 1, 58, 58, 1, 1, 1, 1)
 COVAL(WALLN ,W1 , GRND2 ,0. )
 COVAL(WALLN ,TEM1, GRND2 ,10. )
 
 PATCH(FDFW1DP ,VOLUME, 1, 1, 1, 58, 1, 1, 1, 1)
 COVAL(FDFW1DP ,W1 ,1.25E-04 , GRND1 )
 
 PATCH(FDFCWT ,PHASEM, 1, 1, 1, 58, 1, 1, 1, 1)
 COVAL(FDFCWT ,TEM1,0.23795 ,10. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 70 ;ISWC1 = 1
 LITHYD = 6 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(W1)=10 ;LITER(LTLS)=20
 LITER(TEM1)=20 ;LITER(ENTI)=20
 ENDIT(W1)=1.0E-03 ;ENDIT(LTLS)=1.0E-03
 ENDIT(TEM1)=1.0E-03 ;ENDIT(ENTI)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(V1,LINRLX,1.)
 RELAX(W1,FALSDT,0.05)
 RELAX(NUSS,LINRLX,1.)
 RELAX(TB,LINRLX,1.)
 RELAX(ASUM,LINRLX,1.)
 RELAX(TSUM,LINRLX,1.)
 RELAX(YPL,LINRLX,1.)
 RELAX(UPL,LINRLX,1.)
 RELAX(VDP,LINRLX,1.)
 RELAX(USTR,LINRLX,1.)
 RELAX(UTAU,LINRLX,1.)
 RELAX(FRIC,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 RELAX(HTCO,LINRLX,1.)
 RELAX(STAN,LINRLX,1.)
 RELAX(AREH,LINRLX,1.)
 RELAX(KOND,LINRLX,1.)
 RELAX(EPKE,LINRLX,1.)
 RELAX(DWDY,LINRLX,1.)
 RELAX(LTLS,FALSDT,1.0E+09)
 RELAX(WDIS,LINRLX,1.)
 RELAX(VOR1,LINRLX,1.)
 RELAX(SKIN,LINRLX,1.)
 RELAX(YPLS,LINRLX,1.)
 RELAX(STRS,LINRLX,1.)
 RELAX(LEN1,LINRLX,1.)
 RELAX(ENUT,LINRLX,1.)
 RELAX(TEM1,FALSDT,1.0E+09)
 RELAX(ENTI,LINRLX,0.3)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=1.0E-10
 VARMAX(NUSS)=1.0E+10 ;VARMIN(NUSS)=-1.0E+10
 VARMAX(TB)=1.0E+10 ;VARMIN(TB)=-1.0E+10
 VARMAX(ASUM)=1.0E+10 ;VARMIN(ASUM)=-1.0E+10
 VARMAX(TSUM)=1.0E+10 ;VARMIN(TSUM)=-1.0E+10
 VARMAX(YPL)=1.0E+10 ;VARMIN(YPL)=-1.0E+10
 VARMAX(UPL)=1.0E+10 ;VARMIN(UPL)=-1.0E+10
 VARMAX(VDP)=1.0E+10 ;VARMIN(VDP)=-1.0E+10
 VARMAX(USTR)=1.0E+10 ;VARMIN(USTR)=-1.0E+10
 VARMAX(UTAU)=1.0E+10 ;VARMIN(UTAU)=-1.0E+10
 VARMAX(FRIC)=1.0E+10 ;VARMIN(FRIC)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(HTCO)=1.0E+10 ;VARMIN(HTCO)=-1.0E+10
 VARMAX(STAN)=1.0E+10 ;VARMIN(STAN)=-1.0E+10
 VARMAX(AREH)=1.0E+10 ;VARMIN(AREH)=-1.0E+10
 VARMAX(KOND)=1.0E+10 ;VARMIN(KOND)=-1.0E+10
 VARMAX(EPKE)=1.0E+10 ;VARMIN(EPKE)=-1.0E+10
 VARMAX(DWDY)=1.0E+10 ;VARMIN(DWDY)=-1.0E+10
 VARMAX(LTLS)=1.0E+10 ;VARMIN(LTLS)=-1.0E+10
 VARMAX(WDIS)=1.0E+10 ;VARMIN(WDIS)=-1.0E+10
 VARMAX(VOR1)=1.0E+10 ;VARMIN(VOR1)=-1.0E+10
 VARMAX(SKIN)=1.0E+10 ;VARMIN(SKIN)=-1.0E+10
 VARMAX(YPLS)=1.0E+10 ;VARMIN(YPLS)=-1.0E+10
 VARMAX(STRS)=1.0E+10 ;VARMIN(STRS)=-1.0E+10
 VARMAX(LEN1)=1.0E+10 ;VARMIN(LEN1)=-1.0E+10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
 VARMAX(ENTI)=1.0E+10 ;VARMIN(ENTI)=1.0E-10
 ************************************************************
  Group 19. Data transmitted to GROUND
 GENK = T
 FDFSOL = T
 PARSOL = F
 IENUTA = 22
 ISG62 = 1
 CSG10   ='q1'
 SPEDAT(SET,STORED,FRIC,C,=8.*STRS/(1.*1.)!ZSLFIN)
 SPEDAT(SET,STORED,UTAU,C,=STRS^0.5!ZSLFIN)
 SPEDAT(SET,STORED,USTR,C,=UTAU[&NY&]!ZSLFIN)
 SPEDAT(SET,STORED,VDP,C,=(W1[&1&]-1.)/UTAU[&NY&]!ZSLFIN)
 SPEDAT(SET,STORED,UPL,C,=W1/USTR!ZSLFIN)
 SPEDAT(SET,STORED,YPL,C,=((YVLAST-YG)*USTR)/1.0E-06!ZSLFIN)
 SPEDAT(SET,STORED,AREH,C,=AHIGH!ZSLFIN)
 SPEDAT(SET,STORED,TSUM,C,=0.0!ZSLFIN)
 SPEDAT(SET,STORED,TSUM!FDFCWT,C,=SUM(W1*AREH*TEM1)!ZSLFIN)
 SPEDAT(SET,STORED,ASUM,C,=0.0!ZSLFIN)
 SPEDAT(SET,STORED,ASUM!FDFCWT,C,=SUM(W1*AREH)!ZSLFIN)
 SPEDAT(SET,STORED,TB!FDFCWT,C,=TSUM/ASUM!ZSLFIN)
 SPEDAT(SET,STORED,NUSS,C,=HTCO*0.1*(10.-TEM1[&NY&1])/(3.333333E-0$)
 SPEDAT(SET,STORED,NUSS,C,7*(10.-TB))!ZSLFIN)
 SPEDAT(SET,MAKE,FFAC,C,=0.0)
 SPEDAT(SET,MAKE,USTAR,C,=0.0)
 SPEDAT(SET,MAKE,VDUS,C,=0.0)
 SPEDAT(SET,MAKE,NUS,C,=0.0)
 SPEDAT(SET,STORED,FFAC!WALLN,C,=FRIC!ZSLFIN)
 SPEDAT(SET,STORED,USTAR!WALLN,C,=UTAU!ZSLFIN)
 SPEDAT(SET,STORED,VDUS!WALLN,C,=VDP!ZSLFIN)
 SPEDAT(SET,STORED,NUS!WALLN,C,=NUSS!ZSLFIN)
 SPEDAT(SET,PRINT,F,C,=FFAC)
 SPEDAT(SET,PRINT,U*,C,=USTAR)
 SPEDAT(SET,PRINT,(UCL-UB)/U*,C,=VDUS)
 SPEDAT(SET,PRINT,NU,C,=NUS)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,GXMONI,CLASSIC,L,T)
 SPEDAT(SET,MATERIAL,33,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(V1)=1.0E-10 ;EX(W1)=0.7849
 EX(NUSS)=6.222 ;EX(TB)=5.055
 EX(ASUM)=1.25E-04 ;EX(TSUM)=6.318E-04
 EX(YPL)=439.5 ;EX(UPL)=16.68
 EX(VDP)=4.074 ;EX(USTR)=0.04706
 EX(UTAU)=8.212E-04 ;EX(FRIC)=3.055E-04
 EX(PRPS)=33. ;EX(HTCO)=5.447E-04
 EX(STAN)=0.02331 ;EX(AREH)=2.155E-06
 EX(KOND)=3.333E-07 ;EX(EPKE)=1.0E-10
 EX(DWDY)=354. ;EX(LTLS)=1.714E-04
 EX(WDIS)=7.667E-03 ;EX(VOR1)=354.
 EX(SKIN)=0.06994 ;EX(YPLS)=8.56E-03
 EX(STRS)=3.819E-05 ;EX(LEN1)=0.
 EX(ENUT)=7.414E-05 ;EX(TEM1)=5.893
 EX(ENTI)=7.494E-05
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(V1,Y,N,Y,N,N,N)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(NUSS,Y,N,Y,N,N,N)
 OUTPUT(TB,Y,N,Y,N,N,N)
 OUTPUT(ASUM,Y,N,Y,N,N,N)
 OUTPUT(TSUM,Y,N,Y,N,N,N)
 OUTPUT(YPL,Y,N,Y,N,N,N)
 OUTPUT(UPL,Y,N,Y,N,N,N)
 OUTPUT(VDP,Y,N,Y,N,N,N)
 OUTPUT(USTR,Y,N,Y,N,N,N)
 OUTPUT(UTAU,Y,N,Y,N,N,N)
 OUTPUT(FRIC,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(HTCO,Y,N,Y,N,N,N)
 OUTPUT(STAN,Y,N,Y,N,N,N)
 OUTPUT(AREH,Y,N,Y,N,N,N)
 OUTPUT(KOND,Y,N,Y,N,N,N)
 OUTPUT(EPKE,Y,N,Y,N,N,N)
 OUTPUT(DWDY,Y,N,Y,N,N,N)
 OUTPUT(LTLS,Y,N,Y,Y,Y,Y)
 OUTPUT(WDIS,Y,N,Y,N,N,N)
 OUTPUT(VOR1,Y,N,Y,N,N,N)
 OUTPUT(SKIN,Y,N,Y,N,N,N)
 OUTPUT(YPLS,Y,N,Y,N,N,N)
 OUTPUT(STRS,Y,N,Y,N,N,N)
 OUTPUT(LEN1,Y,N,Y,N,N,N)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
 OUTPUT(ENTI,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 56 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = 2 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP